• 1
  • 2
  • 3
  • 4
  • 5
  • 6

Download category


Download detail
Download >>  Isolation Transmitter >> 1-in-1-out Resistance(electronic scale Displacement)signal Isolation transmitter

Product number:   JSD TAR-1001 1-in-1-out Resistance(electronic scale Displacement)signal Isolation transmitter
Title:    1-in-1-out Resistance(electronic scale Displacement)signal Isolation transmitter
Category:    Isolation Transmitter
Add date:    8/16/2018
Clicks:    55
Download URL:     Download now

1-in-1-out Resistance(electronic scale Displacement)signal Isolation transmitter
◆Small size, low cost, international standards DIN35mm rail mounting
◆Three-port isolation (input, output and power supply)
◆High accuracy (0.1% F.S, 0.2% F.S)
◆High linearity (0.1% F.S)
◆High isolation voltage (3000VDC/60S)
◆Low temperature drift (100 PPM/℃)
◆Wide Industrial class operation temperature (-45-+85℃)
◆High reliability (MTBF> 50 Wan hour)
◆Power supply (5V/12V/15V/24V/9-36VDC multiple choice)
◆Resistor or potentiometer signal input (0-100Ω/0-200Ω/0-500Ω/0-1KΩ/0-2KΩ/0-5KΩ/0-10KΩ, etc.)

◆1-ch Resistance (electronic scale/Displacement signal)isolation and conversion into 1-ch standards analog signal
◆Electronic scale/Resistance signal(Displacement signal)acquisition isolation and conversion into standards analog signal and long distance transmission without distortion
◆Industrial field signal isolation and long distance transmission without distortion
◆Analog signal ground interference suppression and analog isolation, acquisition, transformation and remote transmission
◆FA, OA field instrumentation and sensor signal transceiver
◆To overcome the mutual interference between the equipment and the displacement
◆Industrial field measurement process monitoring and control

General Description:

Jieshengda Technology JSD TAR-1001 series 1-in-1-out Resistance(Displacement/electronic scale)signal Isolation transmitter is an analog signal isolation transmitter, which is used to collect, isolate, amplify and convert the analog signal from resistance, linear electronic scale, angular displacement sensor input, it can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room、 PLC、PC or DCS. The product is isolated between power supply, input and output , the isolated voltage is up to 3000VDC , The isolation transmitter input voltage constant drive for three-wire sensor devices and instrumentation, it is widely used in potentiometer signal isolation, acquisition and transformation; industrial field precision displacement, angle measurement; electronic signals into standard analog signal; It is widely used in the displacement, angle measurement and alarm; industrial field signal isolation and remote transmission, analog signal ground interference suppression, industrial measurement systems, medical electronic equipment, electrical equipment etc. Adopting high efficiency optical isolation technology to achieve signal isolation, it is available to keep high output accuracy, good linearity and low temperature drift.

Shenzhen Jieshengda Technology Co,.Ltd. Copyright © isolation-transmitter.com All Right Reserved |  All products