• 1
  • 2
  • 3
  • 4
  • 5
  • 6

News category

Download

New Products
JSD Technology launched 1-in-1-out frequency pulse converter(F/V,F/I converter)
Add date:2/2/2015  Hits:2038

                          1-in-1-out Frequency Pulse  converter(F/V,F/I converter)
◆ Low cost, thin design, international standards DIN35mm rail mounting
◆ Three-port isolation (input, output and power supply)
◆ Passed CE Certificate (Report number:CTE15FR-546E)
◆ High accuracy (0.1% F.S, 0.2% F.S)
◆ High linearity (0.1% F.S)
◆ High isolation voltage (3000VDC/60S)
◆ Low temperature drift (80PPM/℃)
◆ Industrial class operation temperature (-45~+85℃)
◆ Ultra-wide range power supply design (9~36VDC single power)
◆ International standard signal input (0-50KHz/0-20KHz/0-15KHz/0-10KHz/0-5KHz/1-5KHz/02.5KHz etc.)
◆ International standard signal output(0-5V/0-10V/1-5V/2-10V/0-3.3V/0-10mA/0-20mA/4-20mA)

frequency pulse signal to analog signal isolation transmitter 
Application:
◆ Converting the square wave, sine wave, sawtooth wave into international standards analog signals
◆ Converting unit pulse signal into DC voltage (current) signal
◆ signal ground interference suppression and analog isolation, acquisition, conversion, and long-distance transmission
◆ Industrial signal isolation and long-distance transmission without distortion
◆ instrumentation and sensor signal transceiver
◆ motor speed monitoring and testing
◆ power monitoring and signal acquisition
◆ overcome interference and analog signal acquisition between various devices, isolation, transformation and long-distance transmission
◆ monitoring and measuring various frequency pulse signal equipment
 (F/V、F/I converter) Selection Example:
Example 1:Signal Input: 0-10KHz  (5V voltage pulse );Signal Output : 0-10VDC;Power Supply:12VDC;Model:JSD TFA-1001-233
Example 2:Signal Input: 0-5KHz   ( Open collector );Signal Output : 4-20mA;Power Supply:24VDC;Model:JSD TFA-1001-511
Example 3:Signal Input: 0-15KHz   (5V voltage pulse );Signal Output : 0-20mA;Power Supply:9-36VDC;Model:JSD TFA-1001-UW2

pulse converter
General Description:
Jieshengda Technology(JSD) JSD TFA-1001 ultra-thin series 1-in-1-out frequency pulse signal to analog signal converter(F/V converter) is a high accuracy isolation transmitter. it can isolate and transform the inputting pulse signal(square wave, sine wave, sawtooth wave) into international standards analog current/voltage signal and long-distance transmission without distortion to the control room((such as:PLC,DCS,AD,PC acquisition cards) with corresponding digital pulse frequency signal. its internal integrated multiple low-power high precision high efficiency DC-DC converter to supply power to the input and output, the pulse signal converter is adopted SMD chip technology and modular design makes its isolation voltage between input/ouput and power supply is up to 3000VDC, JSD TAF-1001S series V/F pulse signal converter is adopted high-voltage clamp to the inputting frequency signal. current mode convert into frequency signal has a higher Anti-jamming performance compare to voltage mode, the pulse converter uses two input forms: pulse signal input and open collector input for compatible with more frequency pulse sensor, instrumentation equipment. Pulse converter is adopted international standards DIN35mm rail installation for user-friendly control panel installed. For dual-channel F/V converter Please choose JSD TFA-2002 series, analog to frequency pulse signal (V/F converter) please choose ultra-thin series JSD TAF-1001S, conventional series JSD TAF-1001, JSD TAF-1002, JSD TAF-2002 series.

Datasheet
download:  http://www.isolation-transmitter.com/download/JSD-TFA-1001.pdf

 
 

Top | Back
 
Shenzhen Jieshengda Technology Co,.Ltd. Copyright © isolation-transmitter.com All Right Reserved |  All products